Control Home and Building Fires in Queensland with These Guidelines

Fires are common in Australia. Bushfires alone already number 1,200 as of September 2019, according to Queensland Fire and Emergency Service (QFES). These incidents can threaten both property and lives. To safeguard them, you have to learn more about prevention. That includes a foam fire suppression system cost.

Foam Fire Suppression System Cost and Other Facts

First, what is a foam fire suppression system? It is a method of controlling fire by using foam. It is a combination of water, a foam concentrate or chemical, and either nitrogen or air.

This also uses multiple types of equipment such as compressors and separators. These make up most of the foam fire suppression system cost.

Its main purpose is to separate the air from the fuel. What to select, however, depends on your needs.

Fire suppression systems can be a high expansion or low expansion. High-expansion foams are those that can expand up to 200 times their original volume. It means the foam is light. Take a look at DMA Engineers

This option is best in confined spaces, and it may be ideal for fire safety during construction of rooms. Low-expansion systems, meanwhile, is denser. It is more ideal in places with highly inflammable equipment or supplies like paper.

They can also vary according to the type of foam. This one usually falls as either class A or class B. Class A foam can penetrate deeper into the burning material since the chemical helps break down water tension.

Class B works by blanketing the fuel, suppressing or trapping the hazardous vapour or fire to prevent it from spreading.

Class B foam systems, though, are more harmful to the environment. Queensland already phased out foams that used PFAS (per and poly-fluoroalkyl) chemicals since 2016. For class B fires, it is possible to use compressed foam fire systems instead.

External Cladding Info

Cladding is a material found outside the surfaces of buildings and homes. It acts as a protective layer to reduce heat loss and the effects of environmental elements like rain and sunlight.

Some materials used in cladding, however, can be combustible. Worse, since these can run across the entire section or even all sides of the building, fire can spread on multiple floors fast.

Many of the buildings in Australia still use combustible cladding. For this reason, a Brisbane fire safety audit is necessary. This is especially a must for older establishments with many floors or units.

You have to register the building to Queensland Building and Construction Commission. Then, you can evaluate yourself using the checklist.

If your building is in danger due to combustible cladding, you may have to look for companies like DMA Engineers to perform cladding fire testing. It may be necessary to replace the cladding.

You cannot guarantee fires will not happen in your home or building. Many of the incidents, though, are preventable.

You can do something to reduce their chances of occurrence. All it needs is to be a more responsible building manager or homeowner. By doing so, you safeguard not only your life and assets but also those of your community. For more information, visit their website at: https://dmaengineers.com.au/services/fire-protection/